Water Treatment Chemicals Ultra-High Purity Poly Aluminium Chloride PAC 30% for Decolorizing Purification

• CAS No.: 1327-41-9
• Formula: [Al2(Oh)Ncl(6-N)]M
• EINECS: 215-477-2
• Acid-Base Property: Neutral Surface Disposal Agent
• Certification: WQA, REACH
• Environmental Protection: Yes
• Model NO.: WD-7919
• Color: Yellow
• Appearance: Powder
• Type: Sewage Treatment Chemicals
• 25kg Woven Bag with PE Inner: Powder Polyaluminium Chloride PAC
• Basicity: 60%-80%
• pH (1% Aqueous Solution): 3.5-5.0
• Solubility in Water: Complete
• Usage: Water Treatment Chemicals
• Healthy Certification: Yes
• Toxicity: Non-Toxic
• Certificate: ISO9001, ISO14001
• Al2O3 Content: 28%-30%
• Production Technical: Spray Drying
• Transport Package: 25kg Woven Bag with PE Inner
• Specification: 25 KG/Bag
• Trademark: WELLDONE
• Origin: Shandong Qingdao
• HS Code: 2827320000
• Production Capacity: 50000 Tons/Year

Product Description

Product Description

MSDS 30% Water Treatment Chemical Material Polymer Use Powder Liquid Polyaluminium Chloride PAC Price Supplier

Polyaluminium Chloride Powder
Specification	Analysis Results
Aluminium oxide(Al2O3)	30%-31%
Basicity	60-80%
PH (1% aqueous solution)	3.5-5.0
Water insoluble	0.2% max

 

Polyaluminium Chloride Liquid
Specification	Analysis Results
Aluminium Oxide(Al2O3)	≥10%
Basicity	70%
PH	4
Water insoluble	≤0.4%

1. The purified water quality is better than aluminum sulfate flocculant, and the water purification cost is 15-30% lower than that.

2. The formation of flocs is quick and the settling speed is fast, which is greater than that of traditional products such as aluminum sulfate.
3.consumption of water below the alkalinity of various inorganic flocculants, which can not vote or less alkali agent.
4. The source water PH5.0-9.0 can be condensed.
5. small corrosion, good operating conditions.
6. the solubility is better than aluminum sulfate.
7. Less salt increase in treated water is beneficial to ion exchange treatment and high purity water production.
8. The adaptability to the source water temperature is better than inorganic flocculants such as aluminum sulfate.

Product Application

 

Poly-aluminum chloride is a water purification material, an inorganic polymer coagulant, and a polymer with a relatively large molecular weight and a relatively high charge of inorganic polymer produced by the bridge action of hydroxide ions and the polymerization of polyvalent anions. Pharmacy. In form, it can be divided into two kinds: solid and liquid. The solids are divided into brown, beige, golden yellow and white according to different colors, and the liquid can be represented as colorless, transparent, yellowish, light yellow to yellow-brown.
The poly aluminum chloride having a content of aluminum oxide between 27 and 30 is mostly khaki-yellow yellow solid powder. These types of polyaluminum chlorides have relatively good water solubility, and in the course of dissolution, physicochemical changes such as electrochemical, agglomeration, adsorption, and precipitation eventually lead to [Al2(OH)3(OH)3] precipitation, thereby achieving the purpose of purification. In the use of polyaluminum chloride, without the need for other additives, floe formation is fast and thick, high activity, rapid precipitation, and a clear effect on high turbidity water purification.



The raw material of the yellow polyaluminum chloride is calcium aluminate powder, hydrochloric acid, bauxite, mainly used for sewage treatment and drinking water treatment, if the raw material for drinking water treatment is aluminum hydroxide powder, hydrochloric acid, and slightly calcium aluminate Powder, plate and frame pressure filtration processes or spray drying processes have strict requirements on heavy metals in the drinking water treatment countries, so both raw materials and production processes are better than tan PACs.
The raw materials for the tan aluminum polyaluminum chloride are calcium aluminate powder, hydrochloric acid, bauxite and iron powder. It is mainly used for sewage treatment because it contains iron powder so the color is tan. The more iron powder is added, the darker it is. If the iron powder exceeds a certain amount, it is sometimes called polyaluminum chloride iron. , has excellent results in the treatment of sewage.
 

Concentration Ratio

1. According to the situation of raw water, do a small test before using to obtain the best dose. Small test solution configuration by weight ratio (W / W), generally 2-5% with good. Assembled with 3% solution: said polyaluminum chloride PAC solid 3g, into a 200ml measuring cylinder, add about 50ml of water, to be dissolved and then diluted with water to 100ml scale, shake it.

2. When producing polyaluminum chloride PAC for production, mix and dissolve according to polyaluminum chloride PAC solid:water=1:9 to 1:15 weight ratio. Solutions with a content of alumina less than 1% are prone to hydrolysis and can reduce the effect of use. Concentrations are too high to be easily added evenly.

3. Dosing according to the best dosing amount obtained by small test. For example, if sedimentation tanks are found to be less, if there are large amounts of turbidity, the dosage will be too small. If the sedimentation tank is large and upturned and the remaining turbidity is high, the amount of dosing is too large and adjustments should be made.

Polyaluminium chloride use method:

After the solid product is dissolved in water at 1:3, it is used as a liquid, diluted with 10-30 times of fresh water to a desired concentration. The optimal PH value for the dosing is 3.5-5.0, and the best PH value is added to maximize the benefits of coagulation. The dosage can be determined according to the different turbidity of the raw water, and the best dosage is determined. When the raw water turbidity is 100-500mg/L, the dosage per kiloton is 10-20kg. When the turbidity of the raw water is high, the dosage is appropriately increased, and when the turbidity is low, the dosage can be appropriately reduced.

The dosage of polyaluminum chloride in different water quality:

1. in low turbidity water, the solid polyaluminum chloride product is diluted 1:3 (weight ratio) plus tap water and stirred until completely dissolved.
2. in the life and production use of sewage, with reference to each ton of sewage before adding about 30g of polyaluminum chloride products. Then add the diluted polyacrylamide product (if the effect is not obvious, please reduce or increase the product dosage as appropriate).
 

Company Profile

Shandong Welldone Environmental New Matreial Co.,Ltd is a worldwide competitor of Polymer. We have more than 20 years of experience in manufacturing high quality Polymer, products had been exported to North America, Europe, Middle East and South-east Asia. We had been listed as CHINA TOP 10 manufacturer, annual production capacity for 40,000 metric tons.

To offer GREEN CHEMICAL and ENVIRONMENTAL FRIENDLY CHEMICAL is our mission, 23 professional engineers are focusing on environmental production technical improvement, 2 teams focusing on offering staff safety guarantee. We look forward to establishing long term cooperation with company from all over the world.
 

Packaging & Shipping

 

FAQ

- What kind of PolyAluminum Chloride can your plant produce?

-A- We could produce PolyAluminum Chloride in Powder and Liquid with Color White, Light Yellow, Yellow. Just tell us what you need, we could match you the most suitable items for you.

- What is your Minimum Order Quantity?
-A- Usually 1 MT, but for trial order, less quantity can be accepted. The price can be discount for the large order.

- Can you provide free samples?
-A- Free samples can be offered for your testing and checking, just contact us to get it.

- What about the package?
-A- 25kgs per bag or 1000kgs per ton bag,also we can pack as your request.